Detailed information
Applications
Jiangyin gaohong production WFJ - 15/30/60/100/60/100 type crushing machine is mainly suitable for grinding fineness in 80-400 mesh, yield large crushing requirements, very suitable for pharmaceutical factory, food factory, chemical plant and high precision grinding requirements, grinding fineness can adjust at will.
The crushing machine is mainly composed of main engine, auxiliary engine, electric cabinet of three parts, compact design, reasonable structure, air separation type, no screen. Superfine grinding machine unit is made from high quality stainless steel production. Inside the machine is equipped with classifiers, can make a complete crushing and classification. Negative pressure conveying the crushing operation timing cavity heat continuously, so is suitable for crushing of thermal sensitive material. This machine is used for a wide range, continuous production process, the discharge granularity is adjustable.
Each type of superfine grinding unit contains host, adjustable speed of the screw feeder, cyclone collector plus air hammer shock device, box of bag-type dust collector and air flow.
Device, the wind motor caused by the negative pressure. High-power led the wind motor not only can make the form negative pressure pipeline, to meet the requirements of fine powder automatically be wind suction pipes, and huge volume also took away the heat generated by the crushing cavity continuously, to set the pipe at the same time has a strong cleaning effect. Cyclone collector discharging mouth with a fan, powder outlet no dust float in the sky, achieved the effect of cleaning, environmental protection and saving
For the material
WFJ-20/30/60/100/130/180 ultra-fine grinding unit can handle the crushing and grading of various materials such as chemicals, food, medicine, cosmetics, dyes, resins, shells, etc. Advanced level. It can produce good crushing effect on various materials such as rice, sugar, various kinds of beans, agarwood, pepper, pepper, coffee beans, cocoa beans, fennel, star anise, cinnamon, cumin, cardamom, thyme, etc. High materials such as sesame, walnut, peanut, almond, and melon seeds cannot be crushed separately. If you need to pulverize a material with a particularly high oil content, you need to mix it with other materials that have no oil or low oil content. The proportion of materials with high oil content should be as low as 25%. If there is a large particle of high oil content material, it must be crushed (coarse crushed) with a crusher or a stainless steel coarse crusher before being crushed by the ultrafine grinding unit, and then subjected to ultrafine grinding by an ultrafine grinding unit.
Principle
The material enters the crushing chamber through the screw conveyor through the screw conveyor, and is sheared and crushed by the high-speed rotating blade. The material is transported into the cyclone separator by the method of negative pressure air transport. The bag dust collector and the dust discharged from the material are bagged by the dust box. Filtration and recycling, no dust flying in the production process, and can improve the utilization of materials and reduce the cost of enterprises.
Technicalparameters
Model |
WFJ-20 |
WFJ-30 |
WFJ-60 |
WFJ-100 |
WFJ-130 |
WFJ-180 |
Production capacity(Kg/h) |
10-200 |
30-600 |
50-800 |
100-1200 |
500-2000 |
1000-3000 |
Feed particle size(mm) |
〈15 |
〈15 |
〈15 |
〈15 |
〈15 |
〈15 |
Discharging granularity(mesh) |
80-300 |
80-300 |
80-300 |
80-300 |
80-300 |
80-300 |
Total power(Kw) |
23.5 |
46 |
84.15 |
145 |
182 |
295 |
The main speed(rpm) |
~5000 |
~3800 |
~3000 |
~2500 |
~2000 |
~1500 |
Overall dimensions(mm) |
4200×1200×2700 |
6640×1300×3960 |
7500×2300×4530 |
8000×3000×5500 |
12000×3000×5200 |
15000×3100×6800 |
Weight(Kg) |
850 |
1500 |
3200 |
7000 |
8500 |
12800 |