Detailed information

Descriptions

GH Series Conical Vacuum Dryer is a new generation drying device developed by our factory on the basis of combining the technology of similar equipment. It has two connecting ways, i.e. belt or chain. Therefore it is stable in operation. The special design guarantees two shafts realize good concentricity. Heat medium and vacuum system all adapt reliable rotating connector with the technology from USA. On this basis, we also developed GH-A. It can carry out steeples speed change and constant temperature control
As a specialized factory in drying industry, we supply hundred sets to the customers every year. As for working medium, it may be thermal oil or steam or hot water. For drying the adhesive raw material, we have designed specially a stirring plate buffer for you

Principle

• Let heat source (for example, low pressu『e steam or thermal conduct oil) pass through the sealed jacket. The heat will be transmitted to raw material to be dried through inner shell;
• Under driving of power, the tank is rotated slowly and the raw material inside it is mixed continuously.The purpose of reinforced drying can e realizd;
• The raw material exists is under vacuum. The drop of team pressure makes the moisture (solvent) at the surface of raw material become saturation and will evaporate. •The solvent will be discharged through vacuum pump an recovered in time. The inner moisture (solvent) of raw material will infiltrate, evaporate and discharge continuously. The three processes are carried out unceasingly and the purpose of drying can be realized within a short time

Features

• When oil is used to heat, use automatic constant temperature control. It can be used for drying biology products and mine. Its temperature of operation can be adjusted form 20-160't and within 士 2七．
• Compared to ordinal dryer, its heat efficiency will be 2 times higher
• The heat is indirect. So the raw material can not be polluted. It is in conformity with the requirement of GMP. It is easy in washing and maintenance.

Application

It is suitable for the raw materials that need to concentrate, mixed and dried at low temperature (for example, biochemistry) products in chemical, pharmaceutical and foodstuff industries. Particularly it is suitable for the raw materials that are easy to be oxidized, volatilized and have night heat sensitivity and is toxic and not permitted to destroy its crystal in drying.

Technical parameters

Model	Unit	spec
name	Unit	100	200		350		500		750		1000		1500		2000		3000		4000		5000
total volume	L	100	200		350		500		750		1000		1500		2000		3000		4000		5000
working volume	L	50	100		175		250		375		500		750		1000		1500		2000		2500
heating area	m2	1.16	1.5		2		2.63		3.5		4.61		5.58		7.5		10.2		12.1		14.1
speed	Rpm	6													5		4		4		4
power	Kw	0.75	1.1		1.5		2.2		3		4		5.5		5.5		7.5		11		15
rotating height	mm	1810	1910		2090		2195		2500		2665		2915		3055		3530		3800		4180
total weight	kg	825	1050		1350		1650		1800		2070		2250		3000		4500		5350		6000
design pressure inside the tank	Mpa	-0.09~0.096
design pressure of jacket	Mpa	0.25-0.3
heat medium		Steam hot water
Inside tank of working temperature	℃	≤80℃
Inside jacket of working temperature	℃	≤140℃
Vacuum pump model, power when using condenser		2X-15A 2KW		2X-15A 2KW		2X-15A 2KW		2X-30A 3KW		2X-30A 3KW		2X-70A 5.5KW		JZJX300-8 7KW		JZJX300-4 9.5KW		JZJX600-8 11KW		JZJX600-4 20.5KW		JZJX600-4 22KW
Vacuum pump model, power when no condenser is used		SK-0.4 1.5KW		SK-0.4 1.5KW		SK-0.4 1.5KW		SK-0.4 2.2KW		SK-0.8 4KW		SK-2.7B 4KW		SK-6 11KW		SK-6 11KW		SK-.04 1.5KW		SK-9 15KW		SK-10 18.5KW

Feedback

Please fill in your inquiry form below We will reply to you within 24 hours